Skid-Mounted And Pre-Assembled
For Easy Installation And Operation
Systems
miniBLEND Liquid Polymer Make Down System
The Most Effective Way To Maximize Efficiency Of Neat Polymer
Unit Arrives Piped, Wired, And Factory Tested
The Benchmark For Non-Mechanical Polymer Blending Systems
primary market(s):
-
Industrial Solutions
-
Wastewater Treatment Solutions
common applications:
Industrial Wastewater Treatment
Solid-Liquid Separation
Wastewater Treatment Plants
Solid-Liquid Separation
Wastewater Treatment Plants
commonly used with:
benefits
Reliable And Low Operating Cost
Due to its non-mechanical mixing chamber and 304 stainless-steel frame
Customizable To Fit Specific Solid/Liquid Separation Applications
Choice of diaphragm, peristaltic or remote-mounted neat polymer metering pump
overview
CITCO Water’s miniBLEND Liquid Polymer Make Down System can be custom designed for individual applications. Neat polymer is extremely viscous due to consisting of many longer chains bound up together. The most effective way to maximize efficiency of neat polymer is to allow these long chains to unwind before use.
The proper method of doing this is using a polymer blending make down system. Neat polymer is fed from a bulk polymer tote to a peristaltic pump mounted on the polymer blending system. Pressurized water is then supplied to the polymer blending system. The neat polymer is injected into a water stream and enters a blending chamber to be unwound. The neat polymer feed rate and water feed rate are adjusted to produce a 0.5%-1% make down solution at the discharge of the polymer blending system. This polymer solution is then plumbed to a polymer day tank.
features
- Lightweight and portable
- Manual or automatic pump speed control
- 304 stainless steel frame and mixing chamber
- Explosion-proof Class 1 Div. 1 systems
details
Water Supply Pressure:
-
Water supply must be able to provide the maximum flow rate at
2.4 bar (35 psig) greater than the pressure at feeder discharge
Maximum Operating Pressure:
- 6.9 bar (100 psig)
Dimensions:
- 475 mm x 610 x 1016 mm (18 in. x 24 in. x 40 in.)
Weight:
- 45 kg (100 lbs)
Power Equipment:
- 120 VAC, 0.6 kW (5 Amp)